Photoluminescent This Way Arrow Sign

Photoluminescent This Way Arrow Sign

Photoluminescent This Way Arrow Sign – These Glow in the Dark signs are great tools to aid the protection and health and safety of staff. Accidents are waiting to happen at your business. When they do, ensure that your employees or customers be able to find what is required quickly with the correct emergency signage. Health and safety is an issue businesses can ill afford to ignore. It is essential that all emergency Exits are clearly indicated.

Photoluminescent is the scientific name for a product that glows at night. Any product that uses photoluminescence, such as safety signs are able to emit light without the use of heat or an electrical connection. This is due to that when exposed to a source of intense radiation for an extended length of time, photoluminescent material absorbs and retains particles. Therefore, the energy that has been stored is released when the lights are turned off.

Photoluminescent signs promote a safer work environment by mitigating slips and trips and associated injuries that can occur in an emergency. These signs do not require batteries or power to work and need no maintenance as you will have to do occasional housekeeping to remove dust and dirt. Photoluminescent signs are very reliable in an emergency situation when there is no electricity/power at all.

What are photoluminescent signs?

The short answer, photoluminescent signs illuminate when there is sudden loss of light. The signs are used for:

• Guiding personnel through to an escape route.
• Showing the location of assembly points.
• Highlighting of fire exits.
• Illuminating critical path areas in the event of the power outage.
• Providing information on safety equipment.

Photoluminescent signs light up in the dark through a process called photoluminescence, the photoluminescent material they are made from absorbs natural or ambient light and stores it. This allows them to continue to glow in the dark and provide essential messages and show exit points for your staff.

How long do photoluminescent signs glow for?

Photoluminescent signs can’t be turned on or off. The signs are activated when there is sudden loss of light, and as time goes on, the glow will fade until an external light is re-introduced again to “re-charge” them. Depending on the grade of photoluminescent material used, these signs will glow for an average of 90 minutes from the time the light source goes out.

Why are photoluminescent signs so important?

If an emergency happens, staff and any visitors to the site/factory etc will need photoluminescent signs to lead them to safety. And in the event of a power blackout, these safety signs will streamline the evacuation process.

Industries that require very a high level of workplace safety understand the importance of implementing photoluminescent signage.

Benefits of photoluminescent signs

In addition to keeping workplaces and staff safe, photoluminescent signs have many notable benefits which include:

Reduce Operating Expenses

Photoluminescent signs don’t require electricity to activate, and are a cost-effective alternative to standard emergency signs, they reduce electricity, installation, and maintenance costs.

Aid first responders

In an emergency, responders will need to know exactly where all points of importance are to be able to help personnel evacuate the site. Photoluminescent signs lead the way in blackout conditions.

Long-lasting low maintenance

Standard LED signs are often prone to electrical failure, leading to costly replacements and repairs. Due to our photoluminescent signs being electricity-free and made from hard-wearing material, they require little to no maintenance and can last up to 10 years.

Code Compliant

Photoluminescent signs meet the same code requirements and standards as those of standard safety signs. Installed properly near ambient light for charging, these signs are code compliant and an acceptable alternative to standard safety signs.

Reliable

With their low-maintenance, self-charging qualities, photoluminescent signs are very reliable. With Reliability being one of the most important features any safety equipment and signage can have, photoluminescent signs make a sensible choice for your business.

FAQ Photoluminescent signs

Q: How do they work?

A: Photoluminescent signs illuminate in the dark through the process called photoluminescence. Signs are made from a material that will absorb natural and or ambient light and stores it. When there is sudden loss of light, like an emergency or power blackout, the sign will release this stored light, allowing them to glow brightly and provide essential messages and pathfinding.

Q: How long do they glow for?

A: Unlike standard emergency signage, photoluminescent signs can’t be turned on or off. Their light becomes visible once the light disappears, the glow gradually fades over time. Depending on the grade of photoluminescent material used, these signs will typically glow for up to 90 minutes from the moment the light source goes out. When an external light source is reintroduced, they recharge and will glow again.

Q: Can they replace traditional safety signs?

A: Yes they are a reliable and code-compliant alternative to standard safety signs. They also meet the same code requirements and standards when installed properly to serve as effective substitutes. It’s important to check your specific regulatory requirements and consult with safety professionals to ensure compliance in your industry or region.

Q: Are they suitable for all environments?

A: Photoluminescent signs are extremely adaptable and can be used in various environments, such as industrial, marine or offshore facilities, high-rise buildings, and underground structures. These signs are particularly valuable in environments with a high risk of power failures or blackouts. It’s essential to select photoluminescent signs specifically designed for your intended environment to ensure optimal performance and durability.

Q: How long do they last?

A: Photoluminescent signs are well known for their long life and very low maintenance. When made from hard-wearing materials, they require little to no maintenance and can last up to 10 years. The durability and reliability make them a cost-effective choice compared to standard signs which can be prone to electrical failure and require frequent replacements and or repairs.

Q: Can they be customised?

A: Most definitely! At Hazard Signs NZ, we offer a complete customisation option to suit your specific business needs. If we don’t have the right option listed on our website. You can add your own details like as emergency numbers, specific routes of escape, your own company logo, or any other specific site information. This personalisation will enhance your safety communication and will ensure that all signs align with your organisation’s branding requirements.

Q: Do they comply with safety regulations?

A: Yes, they meet the same code requirements and standards as traditional or electrical safety signs but must be installed properly near ambient light for charging. They are considered a code-compliant and acceptable alternative, providing the necessary safety information and guidance during emergencies.

How to choose the right mounting options.

Corflute: short term less than 2 years outdoors.

Thin PVC: Medium term, more than 2 years outdoors.

ACM: Long term 5 years or more outdoors.

Supplied as a sticker:

long term digital print laminated for long term use. We use a Hi Tac vinyl which allows it to be applied most surfaces.

The mission of Hazard Signs NZ is to provide quality-made safety signs to all of New Zealand. Our great prices and convenient online ordering platform make us a preferred supplier to many NZ businesses. All our signs are designed and manufactured in Invercargill to meet the workplace health and safety needs of all businesses and industries in New Zealand.

Please note. We make some safety signs to order and therefore it may take 5 to 10 business days to receive. If you require your order urgently, please don’t hesitate to contact us to confirm an estimated delivery date prior to placing your order.

If you are not sure about what sign you need for your business, just contact us at +6432183350 or email us and we will make it ready for you.