- Home
- Warning Signs
- Warning Forklifts In Use Floor Sign
- Warning Slippery Sur...NZD $19.50 – NZD $109.50 exc. GST
Warning Forklifts In Use Floor Sign
NZD $19.50 – NZD $109.50 exc. GST
Floor Sign: “Warning Forklifts In Use Floor”
This Floor Sign – “Warning Forklifts In Use Floor” is suitable for advising what is required or available in this area.
- Standard sizes available
- Supplied as an adhesive vinyl sticker which is laminated with a non slip surface
- Printed on a Hi Tac special floor vinyl
- Laminated with approved ASTM C 1028-2007 “Friction Test” for slip resistance
- Can be used in areas where people walk bare-foot as it is certified Class A according to DIN 51097.
Warning Forklifts In Use Floor Sign
Warning Forklifts In Use Floor Sign – Floor – “Warning Forklifts In Use Floor Sign”. These Floor information signs are an efficient way to advise what is required in specific areas. These signs give specific information to meet statutory requirements.
How to Apply Our Floor Stickers
- Get your shit together:
- Floor sticker
- Cleaning supplies (broom, mop, cleaning solution)
- Measuring tape or ruler
- Masking tape (optional)
- Squeegee or a flat, smooth object (like a credit card)
- Prepare the Surface:
- Ensure the floor surface is clean, dry, and free of dust, dirt, and grease. Sweep and mop the area thoroughly.
- Allow the floor to dry completely before applying the sticker.
- Plan Your Placement:
- Measure and mark the desired location for the sticker. Use masking tape to outline the area if necessary.
- Carefully position the sticker to ensure it is straight and centered.
- Apply the Sticker:
- Peel off a small section of the backing paper from one edge of the sticker.
- Align the exposed edge of the sticker with your placement marks.
- Slowly and steadily press down on the exposed edge while peeling off the backing paper, using the squeegee or a flat object to smooth out the sticker and eliminate air bubbles.
- Continue this process until the entire sticker is applied.
- Smooth Out Bubbles:
- Use the squeegee or flat object to press firmly over the entire surface of the sticker, working from the center outward to remove any remaining air bubbles.
- Secure the Edges:
- Ensure the edges of the sticker are firmly adhered to the floor to prevent peeling.
Factors Affecting the Lifespan of Floor Stickers
- Foot Traffic:
- Areas with heavy foot traffic, such as entrances, hallways, and common areas, will cause floor stickers to wear out more quickly. In high-traffic zones, the stickers may need to be replaced more frequently. LIFE EXPECTANCY can be from months to some years depending on usage and customer requirements
- Cleaning Frequency:
- Frequent cleaning, especially with harsh chemicals or abrasive tools, can degrade the adhesive and surface of the stickers. Use gentle cleaning methods to extend their life.
- Environmental Conditions:
- Exposure to moisture, sunlight, and temperature fluctuations can affect the durability of the stickers. In outdoor or damp indoor areas, the stickers may have a shorter lifespan.
- Surface Texture:
- Stickers applied to smooth, non-porous surfaces will generally last longer than those applied to rough or textured surfaces. Ensure the application surface is as smooth as possible for best results.
- Usage Type:
- Stickers used for directional purposes, safety markers, or decorative elements may experience different wear rates based on their function and location. For example, safety markers in industrial settings might wear out faster than decorative stickers in a retail environment.
- Life Expectancy
- The life of the floor sign will depend on many factors – foot traffic – vehicular traffic – turning on sign will damage the sign. From our experience floor signs can last from months to years, it really depends on use, so unfortunately there is no warranty as there are so many factors that will affect the life of the floor sign significantly.
The mission of Hazard Signs NZ is to provide quality-made safety signs throughout New Zealand. Our great prices and convenient online ordering platform make us a preferred supplier to many NZ businesses. All our signs are designed and manufactured in Invercargill to meet the workplace health and safety needs of all businesses and industries in New Zealand.
Please note. We make all safety signs to order and therefore, it may take 5 to 10 business days to receive. If you require your order urgently, please don’t hesitate to contact us to confirm an estimated delivery date prior to placing your order.
If you are not sure about what sign you need for your business, just contact us at +6432183350 or email us and we will make it ready for you.
Size | 225mm x 225mm, 300mm x 300mm, 450mm x 450mm, 600mm x 600mm, 1000mm x 1000mm |
---|---|
Material | Self Adhesive Vinyl Sticker |
You must be logged in to post a review.
Related products
-
Visitors Parking Sign
NZD $13.50 – NZD $48.50 exc. GSTSKU: Notice0075
Select options -
This Equipment Must Be Worn Sign H+E+Hi+C
NZD $13.50 – NZD $48.50 exc. GSTSKU: MS0219
Select options -
This Equipment Must Be Worn Sign H+Eye+G+F
NZD $13.50 – NZD $48.50 exc. GSTSKU: MS0222
Select options -
Prohibition Photography Prohibited Sign
NZD $13.50 – NZD $48.50 exc. GSTSKU: PRO_120
Select options
There are no reviews yet.